Designed for outdoor or indoor installation the RA heat pump
incorporates a Titanium heat exchanger & Scroll compressor, ABS
plastic housing as standard. 9, 15, 23 & 30 kW sizes are available.
The
RA model consists of the same integral parts as the CA model but has
the appearance of a traditional air conditioning unit. The
circulation fan mounted on the side, therefore extracting and
exhausting the air from the sides. Therefore, purchasing an indoor
ducting kit enables this heater to be installed in an indoor
environment!
|  |  |
 | -
Minimal noise output - as the circulating fan is housed indoors
it is ideal for situations where noise issues maybe a problem
e.g. adjoining neighbours or close proximity to house or bathing
area.
-
Extra heat can be extracted from inside the housing i.e. shed,
greenhouse, garage etc and transferred to the pool water!
-
Heater is unseen
-
No corrosion isues
-
No need to cover in winter as debris cannot entre heat pump.
|
Our opinion……a perfect all-rounder, the option of indoor or outdoor
installation is a real benefit. The 9kW is a ideal size for the smaller
pool installation and reasonably priced! The RA model incorporates a
plastic circulation fan and is therefore is naturally quieter than the
CA mode due to have a steel blades that resonate slightly more
sound – please see FAQ for more information.
-
Suitable for Above and Inground pools.
-
C.O.P = 5.25 (At 15c ambient air temperature.
-
Operates down to 0.C deg.
-
Scroll compressor – energy efficient and quiet.
-
Corrosion free ABS housing.
-
Titanium Heat Exchanger.
-
Self diagnosis control panel monitors heat pump operations.
-
Isolated internal electrical compartment.
-
Hot gas reverse cycle defrost operation.
-
5 year warranty on all parts.
-
Available for immediate shipment.
-
National support and helpline available.
-
All heat pumps refrigerant and water tested prior to dispatch.
| Through the wall ducting kit.
 |
To download the Installation Manual for the through the wall Duct click
here |
|
