Aquamatic Safety Cover – Check list To avoid cancellation and for us to keep the agreed installation date , this form must be filled in and arrive 3 days prior to agreed installation date. Thank you. Aquamatic Installation check sheet Aquamatic check sheet completed by pool company 3 days prior to install. Company Name*Job Reference / Customer name*Email* Contact email addressAvailable contact name and number on day of Install.*Track Type*Inwall Liner or Concrete, Flush or Top trackInwall trackFlush trackTop trackPit or Bench /Cabinet* Pit Bench Is the surrounding paving complete*Decking (paving) works complete in between tracks and around pit area?Has the Aluminium pit trim been installed*Aluminium Pit-trim been fixed to front wall of pit housing?Cabinet installation: Have the concrete pads been cast?*The drive unit is fixed to the ground, therefore the torque/stresses will be upon these fixings. The existing paving slabs will not be good enoughHas the flush track receptor been installed correctly*Has Flush Track Receptor been installed to allow a track clearance of 21”/53mm past pool waterline at non-drive-end (Outdoor pool) or 9” past (Indoor pools)?Pool sizeIs track to track dimension the same as the order form?*If the size is incorrect a resizing of the fabric cost will apply. Has track length and diagonals been checked?*Is pool filled with water to finished operational level?*Pool filled with water to the max. freeboard 6” / 150mm.Pit constructionHas pit construction as our specification.*Has the concrete block pit been built to our specifications? Does pit housing have a drainage system installed?* I.e. soak-away or other? ElectricalHas the Hydraulic motor "Power-Pack" & Key-switch been installed.*Has a qualified electrician installed the Hydraulic motor in the plant room, with the Thermal-Overload. Has a Frost Stat been installed?*If no, your Aquamatic cover system may be at risk in winter months. Will an electrical supply be available on site?*Required to run power-tools....Has Key-switch been installed in correct position?*You must be able to view the full operation of the cover, from where the key switch has been positioned.Photos of siteAttach pictures of the pool.Hep us to help you, upload pictures of any areas you think might be an issue/concern before we attend. Drop files here or Accepted file types: jpg, gif, png, pdf, .