Installing a PoolSolar system will enable you to increase your pool temperature to a pleasant level that will result in you enjoying and using your pool more than ever before, and what’s more, it’s free!
If you are an existing pool owner who already has a pool heater in some form or another and are fed up with paying excessive utility bills, then utilising solar pool heater panels is an ideal alternative.
PoolSolar simplifies solar heating for swimming pools, is a DIY product, and can be attached to any existing filtration plant. What better way is there than using the sun’s energy to heat your pool?
The PoolSolar system is an easy to install pool heating system, and is available in 2 sizes, 4M2 & 5M2.
-
5-year warranty
-
Utilise the sun’s natural energy
-
Extend your swimming season
-
Easy to install on any surface
-
EPDM High-quality rubber
-
Maintenance-free
| Code | Product | Price |
|---|---|---|
| 1416-B | Pool Solar 4m² Box Kit ‘A’ – includes 3m x 33cm x 4 Rolls | £365.00 |
| 1415-B | Pool Solar 5m² Box Kit ‘B’ – includes 5m x 33cm x 3 Rolls | £399.00 |
| 1417-B | Pool Solar Vacuum Breaker (for installations above 4m high) | £55.00 |
| 1419-M | 3-way Valve | £69.50 |
| 1418-B | Roof Support Angle per 2m Length | £11.00 |
| 1410-B | 300ml Roof Fixing Paste (2 x Tubes per Box) | £15.95 |
| 1420-B | Electric Solar Control System | £950.00 |
| 1541-X | .50 hp Aquamite Booster Pump 7000lit / 1540 gls | £509.24 |
| 1422-B | Booster Pump Control Sensor | £440.00 |
All prices excluding VAT
Delivery – per box £25.00
Delivery – pallet (up to a maximum of 10 boxes) £90.00
How Does PoolSolar Work?
By simply passing filtered pool water through strips of E.P.D.M quality P.V.C solar matting which is heated by the sun’s rays. The matting is pre-fitted to P.V.C Manifolds that are connected to each other. The manifolds must be plumbed directly to the filtration plant. The amount of PoolSolar you require will depend upon the size of your pool.
Under normal conditions you need to use only half the surface area of your pool as the collector surface i.e. a 30 x15í pool is 450 sqft, therefore approximately 225sqft of Poolsolar matting is required. For south-east and southwesterly facing positions in cooler climates, the PoolSolar matting should be increased by 35-40%.
PoolSolar can be installed almost anywhere – on the roof of your house, garage, porch, summer house, pergola or directly on the lawn. An only important requirement is a sunny place i.e. south facing to ensure maximum heat absorption.
Why PoolSolar?
Poolsolar SOLAR HEATING is a low-cost alternative to heating your above or inground swimming pool throughout the
Summer months. In this country, unheated swimming pools only reach a pleasant temperature for a few days a year. Installing a Poolsolar system will enable you to increase your pool temperature to a pleasant level that will result in you enjoying and using your pool more than ever before, and what’s more, it’s free. If you are an existing pool owner who already has a pool heater in some form or another and are fed up with paying excessive utility bills, then utilising the sun’s energy for free is an ideal alternative. Poolsolar can be attached to any existing filtration plant. What better way is there than using the sun’s energy to heat your pool.
